Correcting the shape and size of teeth or aligning teeth is a cost-effective, cost-effective approach to correcting the design of a smile and having a smile. Beautification and scaling of teeth is one of the cosmetic dental treatments that causes subtle and minor changes in the teeth. But these small changes make a big difference.

Correcting the shape and size of the teeth One of the easiest ways to correct the fullness of the lips is a lack of one hand or a slight misalignment of the teeth, which puts a more attractive smile on the lips. Dentists often correct and align teeth at the same time as another treatment called bonding. The front teeth are the best option for correcting the shape and bonding. Tooth beautification brings higher self-confidence to the patient due to the significant correction of the roughness of the teeth and the alignment of the teeth. Teeth alignment and bonding are less expensive and shorter than dental wiring and other orthodontic procedures.

To correct the shape and size of the tooth or to align the tooth is one of the cosmetic dental methods in which a small amount of enamel, ie the outer layer covering the tooth, is cut to correct the shape, height or surface of one or more teeth. Sometimes it is enough to cut a few millimeters of the tooth in the right place to make the tooth more beautiful. Correction of tooth shape and size is often done along with bonding. Bonding is another cosmetic dental procedure in which the shape of the tooth is modified using composites of the same color as the tooth. Shaping and aligning teeth is sometimes the first step in more expensive cosmetic dentistry, such as veneers, teeth whitening, and crown lengthening, which can take months or even years after cosmetic tooth extraction. But if you do not want to spend a lot of time and money on expensive cosmetic dental treatments, correcting the shape of the teeth and aligning the teeth will bring a beautiful smile on your lips.

Problems that can be corrected by measuring teeth: Defects or problems such as partial overlap or abnormal shape of the teeth, partial filling or fracture of the lip, or excessive sharpness of the canines can often be remedied by partial grinding of the teeth to correct and align the teeth.


Although cosmetic dentistry is a maintenance method for changing the appearance of teeth, it is better to check the strengths and weaknesses of this method before making a decision to make sure it is appropriate. The benefits of correcting the shape and size of the teeth are as follows:

Lower Cost: Shaving your teeth is a cheap way to have a more attractive smile. The cost of this procedure is usually determined by each tooth and the extent of the treatment. If the tooth defect is the result of an injury or accident, the insurance will pay part of the cost.

Painless: Because only superficial enamel is cut, the patient does not feel any discomfort or pain during treatment and does not need anesthesia.

Promoting dental health: Elimination of minor dental overlaps and other defects that can be the site of plaque and plaque accumulation reduces the risk of tooth decay and gum disease.

Orthodontic alternative: Correcting and aligning teeth can sometimes be an alternative to orthodontics, as this simple method can also align teeth and eliminate overlap and irregularities.

Correcting and aligning teeth is the best method for people who want to make only minor changes to their teeth or whose teeth need a minor restoration. This procedure is recommended for patients whose teeth are slightly crooked or irregular or too sharp or one side of the tooth is more protruding than the other. Of course, cosmetic dentures are not suitable for decayed, denervated, or unhealthy gums.

Correction of tooth shape is done using special dental tools and abrasion techniques. The dentist carefully cuts the enamel with a laser or drill. Before starting the treatment, the teeth are photographed to check the location and amount of pulp and to make sure that the teeth are healthy. The dentist then marks the areas needed for sharpening and beautification with a pencil. The dentist then cuts the deformed areas, shortens the tooth, or manipulates the abnormal tooth to fit the rest of the tooth and correct problems with the bite or misaligned teeth. The dentist removes or minimizes surface imperfections with special polishing tools and sometimes scales the sides of the teeth with sandpaper-like strips. The dentist eventually straightens and polishes the teeth. Correction of tooth shape and size sometimes requires only a 30-minute session, although the duration of treatment depends on its extent.

If the shape of the tooth is corrected along with the bonding, the dentist can correct the filling and the distance between the teeth, make the tooth more beautiful and its color better. Before applying the resin, the dentist applies a dermal device such as acid to the tooth surface so that the resin adheres well to the tooth. Because this causes tooth sensitivity, the dentist may anesthetize the tooth. The dentist sometimes applies a preparation fluid to the tooth to strengthen the bond between the resin and the tooth. The dentist forms the resin and finally dries and hardens it with light. Bonding lasts 30 minutes to an hour, if beautification is more than one tooth, the patient is given several sessions.

Crown lengthening is a surgical procedure performed to determine more of the tooth structure so that the tooth can be properly repaired. Prolonging or lengthening the crown, as the name implies, occurs when the tooth is not long enough to be maintained in restorative treatments such as veneers. This is a surgical procedure that provides restored teeth with better function and longer life.


Crown lengthening, unlike many cosmetic dental treatments, only needs to be done once, after which there is no need for any manipulation or repetition of the same procedure. After this treatment, in addition to making the smile more symmetrical and wider, the health of the teeth also improves. The risk of tooth decay decreases after the crown is raised, because the more exposed the tooth is, the greater the impact of brushing and flossing. This surgery is short and usually completes in 30 to 60 minutes.


Tooth fracture: The tooth sometimes breaks along or below the gum line. If the tooth needs a large filling, the crown should be raised to reveal more of the tooth structure.

Insufficient tooth structure:
Sometimes tooth decay and perforation are so extensive that they cannot be repaired even by denervation. In this case, the veneer is the best way to repair the tooth and restore the function of the decayed tooth. Caries sometimes extend below the gum line, so a simple veneer may not be enough to preserve it. After tooth decay, not enough of the tooth structure may remain to be veneered. Improper dental veneers cause chronic irritation and inflammation.

Increasing the length of the tooth crown is therefore the best solution that makes it possible to repair a larger part of the tooth in a proper way. The veneer that is placed on the tooth after increasing the length of the crown is stronger and more durable.

Cosmetic Surgery

Sometimes the teeth look short, but they are actually tall and only cover a large amount of the gums. Increasing the length of the crown corrects cosmetic problems such as a gingival smile. As the tooth grows taller, the smile becomes more beautiful. In addition, after increasing the length of the tooth crown, the fit between the width and the length of the tooth also improves. Increasing the length of the tooth crown can be done along with other cosmetic treatments or alone to correct the smile pattern.

Increasing the length of the tooth crown is not suitable for everyone. It is not necessary to increase the length of the crown for patients who need a veneer. But if the crack or tooth decay hole is deep enough that it can be easily veneered, the durability and strength of the veneer will increase as the crown length of the tooth increases. In addition, by lifting the crown, it is easier to clean the teeth and it can be brushed and flossed well to maximize the life of the new veneer.

Treatment steps

The dentist performs this surgery in the office by injecting a local anesthetic. Of course, the patient receives sedation if necessary so that there is no fear or anxiety during treatment.

After the treatment area is anesthetized, the dentist begins to measure and shape the extra gum tissue and bone. The dentist first makes incisions in the tissue and removes the gums from the tooth. In most cases, a small amount of gum tissue is also needed.

Once a sufficient part of the tooth structure has been identified, the dentist rinses the area well with saline solution and completes the procedure by suturing the gums. Surgical wounds are sometimes closed with a special dressing. After this simple surgery, a larger part of the natural structure of the tooth is identified and a better foundation is obtained for a more efficient and durable veneer. After lifting the crown, the veneer is placed on it. Since the bony part of the tooth has been manipulated and even removed, the dentist will take all precautions so that the patient is completely comfortable. This treatment takes about one to two hours.

Laser crown lengthening

Increasing the length of the tooth crown can be done in a simpler method called electrosurgery. In this treatment, a laser device is used to measure the gums and mark the teeth, but the bone is not manipulated. Electrosurgery is usually performed only for minor cases and is not suitable for deep fillings or fractures.

The period of recovery

The dentist prescribes medication to manage the pain or discomfort, provides the patient with a special mouthwash, and provides the necessary care recommendations for the recovery period. Oral hygiene should be observed as usual; Of course, it is better not to irritate the gum area for a few weeks.

The dentist asks the patient to come in a week later to have the stitches removed. After the stitches are removed, it takes some time for the gums to heal, after which the dentist completes the restoration or cosmetic treatment of the tooth.

The age of teething varies from child to child, but the baby’s first teeth usually appear around the age of 6 months. Some babies may not have had them before, at 3 months, or some may not have had them until their first birthday.

What are the signs and symptoms of tooth extraction?

Teething is generally associated with gum and jaw discomfort. The tooth moves below the surface of the gum tissue. This area may look a little red and swollen. Some teeth may be more sensitive when they are coming out. Others may cause more discomfort due to their larger surface. Symptoms that occur with teething include:

The gums are red and swollen at the site of the tooth.

Some babies may have problems.

Some may have a slight increase in body temperature (less than 101 degrees Fahrenheit) or 38.3 degrees Celsius.

Water flowing from the mouth.

Restlessness or decreased sleep due to gum discomfort.

Refusal to eat food due to pain in the gum area.

Touching the mouth.

Mild rash around the mouth due to skin irritation, secondary to excessive water infiltration.

Rubbing the cheek or ear area as a result of recurrent pain during tooth extraction.

What are the symptoms of tooth extraction?

Fever: Because tooth eruption is a normal physiological process, the association with fever and systemic disorders is not justified. Any fever above 101 ° F is not associated with tooth extraction.


Cold symptoms.

Runny nose and cough.

Long-term fault.

Other serious illnesses such as seizures, ear infections, respiratory infections and even death have been mistakenly attributed to tooth decay.
Does teething cause fever in children?

Many still believe that a child can have a fever while teething (even health care providers!) But the results of well-done medical research have shown that temperatures above 101 degrees Fahrenheit Teething is not related. If there is a fever during this period, it is a mere accident and must be caused by something else.

However, if you compare the body temperature of a child who is having a tooth extracted with a child who is not having a tooth extracted, his or her temperature may be a little high, but this increase is not important enough to be called a fever. Do they have a little fever? Most teeth appear between 4 and 15 months during this time, and babies become more active and mobile. They learn to crawl and walk. They are often immediately exposed to a wider range of infections. And putting them in your mouth is a common thing they do. When your baby starts crawling around, this is a great way to catch a virus that may then lead to a fever.

How to manage the pain of teething your child?

Use these several teething solutions to help manage your child’s teething

Try to be available for support when your child is in pain.

Reduce your baby’s discomfort by offering something cool to chew on (such as a damp bath towel or cold pacifier or teething ring).

Try not to use frozen objects that may cause frostbite.

Do not give your child any hard food like raw carrots, it may cause suffocation.

Do not try to give your child toothpaste because it may contain a lot of sugar.

When removing a tooth, massage your baby with a clean finger to help the tooth emerge and emerge from the cleft.

Acetaminophen or pills can help relieve the pain and discomfort of constant teething, but consult your doctor before offering any treatment.

Over-the-counter tooth extraction gels that contain topical analgesics can help reduce pain, but should be used with caution and only with a doctor’s advice.

Inflammation of the gums before a complete eruption of the crown of the tooth may cause temporary pain, but it will usually subside within a few days. It is not necessary to remove the gum coating on the tooth to help the tooth appear.

When should you see a doctor?

See your doctor if your child has a fever (above 101 ° F), diarrhea, vomiting and other important issues such as seizures.

Hyperdontia is the growth of extra teeth that should not normally be present. Normally, the number of deciduous teeth is 20 and the number of permanent teeth is 32. Primary teeth are the primary teeth that begin to grow and protrude from the gums from infancy and gradually fall out at school age and are replaced by permanent teeth. At the age of 21, all permanent teeth are usually extracted. A condition in which the number of deciduous teeth is more than 20 or the number of permanent teeth is more than 32 is called extra teeth.

Extra teeth may occur in any part of the dental arch but are often seen as permanent teeth in the position of the lateral front teeth in the maxilla. After that, the most common causes of extra teeth are related to the teeth of the upper and lower maxilla. Extra teeth usually grow in the form of extra latent wisdom teeth. The extra maxillary anterior tooth is called the mesiodens and the four extra-large molars are called the distodens or distomolars. The extra baby tooth that is seen shortly after birth is called a natal tooth.

Extra teeth occur in about one percent to four percent of the population, and the ratio of men to women is two to one. Most extra teeth are limited to one tooth, but sometimes several rows of teeth may protrude.

Identification of extra teeth should be done as soon as possible because extra teeth cause cosmetic and functional problems for the person. Extra teeth essentially cause clinical problems that can usually be treated with tooth extraction if possible.

Extra teeth may obstruct the protrusion of adjacent teeth and cause clutter and clogging of the teeth, in which case orthodontic treatment should be corrected in the future if treatment is not done early.

Also, failure to treat extra teeth in a timely manner can lead to cysts or tumors.

Extra teeth may prevent the permanent teeth from coming out normally or even stick to them. In such cases, the teeth may be subject to decay.

Excess teeth cause other teeth to tilt, making it difficult to chew food.

What are the reasons for extra teeth coming out?

Researchers have not yet found a definite cause for the growth of extra teeth in the mouth. However, genetics is believed to play a role.

Extra teeth can be caused by mouth problems such as cleft lip and palate.

Extra teeth are a condition that may be associated with certain conditions, including Gardner’s syndrome and Ehlers-Danlos syndrome.

Usually, people do not notice the presence of extra teeth in the jaw until the whole set of deciduous teeth grows. Extra teeth form in the early stages of tooth development. At this stage, the tooth bud opens and two teeth are formed, one of which is an unnecessary extra tooth.

What is the treatment for extra teeth?

Extra teeth cannot be prevented. The main treatment for this condition is tooth extraction. However, aligning the extra teeth with the adjacent teeth is also an option that should be considered. The consequences of this treatment may be beneficial. If this treatment causes problems for adjacent teeth, the only possible way is to extract extra teeth.

If the extra tooth does not cause any problems, it is better to leave it to avoid the complications and complications related to extra tooth extraction such as cutting or cutting off blood and nerve vessels, improper protrusion of teeth, ankylosis, maxillary tuberculosis fracture, and at risk. Avoid getting the maxillary sinus and pterygomaxillary space.

Extract extra teeth

Surgery may be needed depending on the location of the extra tooth. Tooth extraction is performed under local anesthesia or general anesthesia, depending on the severity and complexity of the problem.

To prevent any future dental problems, you should see your child’s orthodontist from the age of seven. In this examination, the orthodontist can detect the presence of extra teeth and treat them before more serious problems occur. You should consult a dentist to check for any dental condition.